-300.00

ESP32 Wearable (BNO055)

Availability: Pre-order

The BNO055 is the first in a new family of Application Specific Sensor Nodes (ASSN) which implements a 9-axis Absolute Orientation Sensor and sensor fusion in a single package.

   

2,450.00 2,150.00

Compare

Description

ESP32 based wearable with a 9-axis Bosch (SiP) System in Package motion sensor BNO055

ESP32 is low-cost, low-power system on a chip microcontrollers with integrated Wi-Fi and dual-mode Bluetooth. ESP32 is highly-integrated with in-built antenna switches, RF balun, power amplifier, low-noise receive amplifier, filters, and power management modules. ESP32 adds priceless functionality and versatility to your applications with minimal Printed Circuit Board (PCB) requirements.

BNO055 is the first in a new family of Application Specific Sensor Nodes (ASSN) which implements a 9-axis Absolute Orientation Sensor and sensor fusion in a single package.

The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit microcontroller running the company’s BSX3.0 FusionLib software

This ESP32 Wearable board can easily be integrated into existing environment, reducing the complexity and providing low-cost solution for Wearable devices. It has on-board connections for 3.7V Lipo battery with charging capability making it a portable solution

.Want to Customize your design?   

Features : 

  • Dual Mode Wifi and BT with on-board Antenna (ESP32)
  • Compliant with Bluetooth v4.2 BR/EDR and BLE specifications
  • Outputs fused sensor data
  • 3 sensors in one device
  • Compatible with Arduino IDE
  • High accuracy and stability of data
  • Power Management – Normal, Low Power, Suspend mode
  • USB programming and charging capability
  • Small Form factor 31.5 x 37mm Wearable Board

Features of WiFi & BT

WiFi

  • 802.11 b/g/n
  • 802.11 n (2.4 GHz), up to 150 Mbps
  • Automatic Beacon monitoring (hardware TSF)
  • 4 × virtual Wi-Fi interfaces
  • Simultaneous support for Infrastructure Station, SoftAP, and Promiscuous modes
    (Note that when ESP32 is in Station mode, performing a scan, the SoftAP channel will be changed)

Bluetooth

  • Compliant with Bluetooth v4.2 BR/EDR and BLE specifications
  • Class-1, class-2 and class-3 transmitter without external power amplifier
  • +12 dBm transmitting power
  • Adaptive Frequency Hopping (AFH)
  • NZIF receiver with –97 dBm BLE sensitivity
  • High-speed UART HCI, up to 4 Mbps
  • Bluetooth Piconet and Scatternet
  • Multi-connections in Classic BT and BLE
  • Simultaneous advertising and scanning

 

Features of Sensor

  • Programmable and flexible functionality of the 3 Sensors:
    • Accelerometer
    • Gyroscope
    • Magnetometer
  • Wide Range of Config Modes
    • Fusion Modes
    • Non-Fusion Modes
  • Selectable Output data formats
  • Euler and Quaternion data

Applications : 

  • Wearable Devices
  • Medical Applications
  • Augmented reality
  • Navigation
  • Gaming
  • Fitness and well-being
  • Context awareness

Multiple example codes for:

  • Step Detection
  • Motion Capture
  • Bunny Motion
  • Raw Data
  • SensorApi
Design Resources(Downloads) – Technical Documents
Document Type Title Date
Application Notes ESP32 Wearable hardware configuration and PCB design considerations 24/02/2020
Design files WiFi + BT ESP32 based Wearable Design Files 24/02/2020
User Guides WiFi + BT ESP32 based Wearable User Manual 24/02/2020

 

Design Downloads

  • ESP32 Datasheet
  • BNO055 Datasheet
  • ESP32 Wearable Gerbers
  • ESP32 Wearable Schematic pdf
  • DXF and 3D files

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “ESP32 Wearable (BNO055)”

There are no reviews yet.